Exceeding the weight capacity can result in serious personal injury or damage to equipment. Future Sound & Vision trading as Future Automation intend to make this and all documentation as accurate as possible. However, Future Automation makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
AL965 Actuator Lift Contents Page Introduction Safety Information Contents Contents Tool Indicator Icons Installation Parts List Package Contents Stage 1 Before You Start Resetting The AL965 Stage 2 Fixings To The Cabinet Stage 3 Releasing The Screen Uprights Stage 4...
Any damage to products during transit that is not checked and notified as “unchecked” or “damaged” upon receipt of delivery. Any part of your system that needs to be replaced during a warranty repair becomes the property of Future Automation.
AL965 Actuator Lift Nuts & Bolts Multipack: Package Contents A range of nuts, bolts, washers 1 - Mechanism and spacers to help add in the 1.1 - Base Plate mounting for your screen 1.2 - Linear Actuator x2 1.3 - Base Shelf 1.4 - Upper Bracket Plate...
- The unit is in the closed position - Test the mechanism by running it up and down Resetting the AL965 The AL965 mechanism will not move until it has been reset: RF - LEFT -To reset the product using IR press the ‘LEFT ARROW ARROW BUTTON BUTTON’...
AL965 Actuator Lift Fixing to the cabinet -Place the mechanism into the cabinet and fix into place,(fixings not supplied.) - Check the measurements of the cabinet to the technical sheet - x10 optional fixing holes in base plate Fixing holes...
AL965 Actuator Lift Screen Plates Releasing the screen uprights Loosen upright bolts as shown to release screen uprights from the screen plate Upright Bolts Screen Uprights Remove screen up rights by unhooking over the horizontal bars Page 7 of 18 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565...
AL965 Actuator Lift Aligning the screen Align the top of the screen so that it’s just below the underside of the lid when the mechanism is in the IN position When the lift is fully down the screen needs to be just under the top lid...
AL965 Actuator Lift Mounting the screen -Place the screen uprights into position on the back of the screen -Secure into place using the range of nuts, bolts and washers provided -Once the screen uprights are attached, overlap the screen over the horizontal...
AL965 Actuator Lift Inserting the shelf To adjust the height of the shelf loosen the grub screws in the fixing posts x4, move the shelf up or down to the desired height Nylon then tighten the grub screws bolts back up to secure into place.
AL965 Actuator Lift Connecting the push bar -Stick the felt pad onto the underside of the lid so it’s in-line with the push bar. -Make sure that when the mechanism opens the push bar is in contact with the felt pad at all times...
AL965 Actuator Lift Final checks Final movement. Make sure the unit runs smoothly and that the push bar hits and then runs along the felt pad. -Make sure that the lid doesn’t fall back over its self when the unit opens.
AL965 Actuator Lift Contact Closure - Use an RJ45 connector in the appropriate socket on the control box to operate via contact closure WIRE / CABLE CONTACT CLOSURE DESCRIPTION ACTION 568A 568B LED INDICATOR 12V SUPPLY PIN 1 NOT USED...
AL965 Actuator Lift Power Supply IR Controls General Wiring AC Mains Power Motors IMPORTANT Control Box If the mechanism is left without power for more than 14 days, all memory positions will be lost. If this is the case, the mechanism will need to be reset, see page 6 for further information.
AL965 Actuator Lift Power Supply RF Controls General Wiring IMPORTANT AC Mains Power If the mechanism is left without power for more Motors than 14 days, all memory positions will be lost. If this is the case, the Keypad mechanism will need to be reset, see page 5 for further information.
AL965 Actuator Lift Actuator lift 965 - Trouble shooting guide Having problems? - Check the following: 1. Are all the connections correct? 2. Is the mechanism being operated correctly? If the mechanism does not operate correctly, check the items listed in the table below.
AL965 Actuator Lift A general technical overview of the AL965 actuator lift AL965 Product Dimensions (W,D,H When 1200x250x850mm Closed & Fully Assembled) [47.4x9.8x33.5"] Weight (Kg) 38Kg [83.8lb] Power Consumption Max 200W Power Consumption On Standby Lifting Capacity (Kg) 100Kg [220.5lb]...