Future Automation WB FSA3 Technical Sheet

WB FSA3 - Wall Box for FSA3
DESIGN HIGHLIGHTS
• Adjustable tilt function
• Bi-directional swivel motion
up to 90°
• Stylish look and finish
• Cable and junction box
knockout holes
• Integrated cable
management
WARNING
IMPORTANT
It is the responsibility of the
installer to make sure the
product is safely secured
to the wall or ceiling.
Cable management is
neatly organised and will
not be obstructed or
pinched by the bracket.
www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565
Technical Sheet
ISSUE 002
SHEET 1 of 7
FUNCTION
A wall box for mounting the
FSA3 Mount in a recess to
allow fo an ultra slim
installation
SUITABILITY
The WB FSA3 is suitable for
installation in 16"stud walls
The FSA3 mount is suitable for
screens with VESA 400, 300 &
200 mount pattern.
The FSA3 mount is suitable for
screens from 37" up to 55"
with a max weight of 25kg.
SPECIFYING
Check wall makeup to
decide on fixings to be
used.
Check viewing angles and
position for feasibility.
Check screen details for
mounting possibilities.
CONTROL
Manual operation.