Exceeding the weight capacity can result in serious personal injury or damage to equipment. Future Sound & Vision trading as Future Automation intend to make this and all documentation as accurate as possible. However, Future Automation makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
PIC SD - Picture Side Mechanism Contents Page Introduction Safety Information Contents Contents Tool Indicator Icons Installation Parts List Package Contents Stage 1 Before You Start Check Marking Mechanisms Positions Stage 2 Mounting The Mechanism Stage 3 Mounting The Mechanism...
Any damage to products during transit that is not checked and notified as “unchecked” or “damaged” upon receipt of delivery. Any part of your system that needs to be replaced during a warranty repair becomes the property of Future Automation.
PIC SD - Picture Side Mechanism Package Contents PIC SD - Picture Side Mechanism. 1 - Mechanism Available in 2 standard sizes, 1.1 - Frame Horizontal Member PIC SD1 & 2. 1.2 - Frame Vertical Member Custom sizes also available.
PIC SD - Picture Side Mechanism Before you Start Check, Check the Following: - The product is in good condition - No damage to any parts Marking Mechanisms Positions You will receive your mechanisms with the wall plate in the centre of the frame.
PIC SD - Picture Side Mechanism Mounting the Mechanism Once marked, put appropriate fixings into the marked points. Offer the mechanism to the wall and secure in place using appropriate fixing. Make sure to run the mechanism power cables through the hole in the wall...
PIC SD - Picture Side Mechanism Final Mounting Fixings Be sure to use as many fixings through the various slots as possible. Move the frame left to right to gain access to the top and bottom mounting slots. Various fixing slots Make sure the mechanisms are fixed securely and safely.
PIC SD - Picture Side Mechanism Testing the Mechanism This is a good time to run and test the mechanism. Make sure the frame is square and wont clash into anything in it’s moving path. Make sure the control box is connected correctly and the cables wont catch on the mechanism.
PIC SD - Picture Side Mechanism Fitting the Moving Panels to the Mechanisms To make sure the moving panel doesn’t fall off the mechanism attach the moving panel brackets as shown. 10mm To alter the level of the moving panel adjust the height of these bolts which the moving panel brackets sit on.
PIC SD - Picture Side Mechanism Adjusting the Stop Positions To alter the stopping positions of the moving panel loosen these 2 bolts on both sides and then slide the bracket left to right to determine the finish positions. Page 10 of 20 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565...
PIC SD - Picture Side Mechanism Optional, Mounting the Screen In some cases the moving panel will be hiding something else other than a screen such as a safe or hi-fi which might already be installed otherwise mount the screen into the recess.
PIC SD - Picture Side Mechanism Final Checks Make sure the mechanism is fixed securely and safely and nothing is in the path of the moving panel. Mechanism Movement Page 12 of 20 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565...
PIC SD - Picture Side Mechanism Connections - The mechanism must be connected to all DC controls Connect infrared sensor here Ensure the plug is connected correctly and secure Remove this screw to release the lid Page 13 of 20 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565...
PIC SD - Picture Side Mechanism Contact Closure - Use an RJ45 connector in the CCI socket on the control box to operate via contact closure WIRE / CABLE CONTACT CLOSURE DESCRIPTION ACTION 568A 568B LED INDICATOR 12V SUPPLY 12V SUPPLY - CURRENT LIMITED When 12V attached, device will go OUT.
PIC SD - Picture Side Mechanism RS232 - Use an RJ25 connector in the socket marked RS232 on the control box to operate using RS232 Pin 1: RX Pin 6 : TX Pin 2: TX Pin 3 & 4: GROUND...
PIC SD - Picture Side Mechanism Replacing Batteries Future Automation IR Remote Controller needs x2 AAA batteries which are provided within the packaging Operation Buttons In - Hides Stop - Will stop the screen the operation at any point Out - Reveals...
PIC SD - Picture Side Mechanism PIC SD Picture Side Mechanism - Trouble Shooting Guide Having problems? - Check the following: 1. Are all the connections correct? 2. Is the mechanism being operated correctly? If the mechanism does not operate correctly, check the items listed in the table below.
Page 19
PIC SD - Picture Side Mechanism Test Motor Operation If the mechanism is not working, it is possible to test the motor directly. To do so, locate and open the control box. A / + B / - Motor direct drive...