Table 2-12 J5: Pri Port Connector (Rj45); Table 2-13 Switch Setting Of 1Priu-C1 - NEC SL1000 Hardware Manual

ISSUE 1.0
3.4.5.1 Connector
Following table shows the pin-outs for the RJ-45 cable connector for S-Bus and T-Bus RJ-45 connec-
tions.
8 765 4321
3.4.5.2 Switch Setting
The following figure shows the location of the switches and LEDs on the IP4WW-1PRIU-C1 Card.
1. Set the switches J6 to J9 according as the system referring the table.
Switch No. Switch Position
J6, J7
J8, J9
2. Connect the cables from the NT1 Network Termination cable to the J5 connector on the 1PRIU-C1
Card.
3. Assign whether the unit works as PRI/T1/E1 by PRG10-51-01.
With normal operation, D4 LED flashes green.
Hardware Manual

Table 2-12 J5: PRI Port Connector (RJ45)

Pin No. RJ-45 Cable Connector-
PRIU-J5 S-Bus Connection
1
2
3
4
5
6
7
8

Table 2-13 Switch Setting of 1PRIU-C1

2M (default) Connect PRI/E1 (2.048 Mb/s) line
1.5M Connect PRI/T1 (1.544 Mb/s) line
T (default) T-Bus connection
S S-Bus connection
RJ-45 Cable Connector-
PRIU-J5 T-Bus Connection
TA
TB
-
RA
RB
-
-
-
Description
SL1000
RA
RB
-
TA
TB
-
-
-
2-51