Figure 2-66 Mounting The 2Nd Expansion Interface Card - NEC SL1000 Hardware Manual

SL1000
PCB at the top of 408E/008E/000E/1PRIU.
Expansion Interface Card
(2nd PCB)
Nylon-Spacers
Expansion Interface Card
(1st PCB)

Figure 2-66 Mounting the 2nd Expansion Interface Card

6. In case the 3rd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with
408E/008E/000E/1PRIU)
2-42
J1
J2
ISSUE 1.0
Screws
Screw position
2nd EXP.
PCB
Right side is same
as this.
Metal-Spacers
Installation