ISSUE 1.0
13. Plug the Battery connection cable into the Fuse unit as below.
Battery connection
cable
Fuse unit
14. Insert six tabs (a to f) on Front cover into the holes (A to F) on Battery box. Slide the Front cover
and tighten the two screws.
f
Front cover
2.6 Mounting the IP4WW-Battery Box
The IP4WW-Battery Box can be installed either on the floor or wall. One KSU can be mounted on an
IP4WW-Battery Box.
2.6.1 Floor-Mounting the IP4WW-Battery Box
Battery box can be mounted on the floor using the FM/WM Base-F, FM/WM Base-R and WM Support.
(Note: FM = Floor Mount and WM = Wall Mount)
Hardware Manual
Figure 2-37 Plugging the Battery Connection Cable
d
b
e
Figure 2-38 Installation of Front Cover
F
D
B
c
a
A
Two screws
(with stopper)
SL1000
E
C
2-25