SL1000
1.4.3 Connectors Location (EXIFB-C1)
J1
J2
J3
No.
J1
Expansion Connector
J2
Expansion Connector
J3
Expansion Connector
J4
Mother PCB
J5, J6
Debug Purpose (Not used)
1.4.4 Installing the EXIFB-C1 PCB
Do Not Power on until all installation have been completed.
1. Turn off the system power and disconnect the AC cord from KSU.
2. Open and pull out the Sub-Cover of the main KSU.
2-8
J5
Figure 2-11 Connectors of EXIFB-C1
Table 2-4 Connectors of EXIFB-C1
Connectors
Sub-Cover
Figure 2-12 Removing the Sub-Cover
J6
J4
Connectable Devices
Expansion KSU 3
Expansion KSU 2
Expansion KSU 1
J1 connector on 408M-A1
-
Sub-Cover
Tab
ISSUE 1.0
Tab
Installation