Cabling And Setting The Expansion Interface Card; Figure 2-73 Additional Mounting The 2Bridb-C1; Figure 2-74 Replacing The Main-Cover - NEC SL1000 Hardware Manual

SL1000
5. Mount the 2BRIDB-C1 with 008E-A1/000E-A1 PCB into the KSU.
008E-A1/000E-A1 PCB
and 2BRIDB-C1 PCB
Nylon-
Spacers
6. Replace the Main-cover and fasten two screws.
Main-Cover
Hooks

3.4 Cabling and Setting the Expansion Interface Card

Precautions for Cabling
• Do not wire the cable with an AC cable, computer, etc.
• Do not run the cable near the high frequency generating device.
• Use cable protectors in case the cables run on the floor.
• Aerial distribution wiring is not allowed.
2-46
J1

Figure 2-73 Additional Mounting the 2BRIDB-C1

Figure 2-74 Replacing the Main-cover

J2
Two screws
ISSUE 1.0
Screws
Metal-Spacers
Installation