Loading The Customer Data; Figure 3-10 Inserting The Cf Card; Figure 3-11 Prg90-03 Display; Figure 3-12 Prg90-04 Display - NEC SL1000 Hardware Manual

ISSUE 1.0
CF card
2. Turn the power on, enter to the PRG90-03 at the Programming Mode.
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display will be changed to the next PRG.
5. Remove the CF Card and exit from the Programming Mode.
The saved data on CF Card can not be edited by the PC.

2.4 Loading the Customer Data

The backed up customer data can be loaded to the system by CF Card. The PZ-VM21 daughter board
must be installed to the CPU card with a CF card inserted that has the saved customer data loaded.
For the details of PZ-VM21 daughter board installation, refer to
Hardware Manual

Figure 3-10 Inserting the CF card

Figure 3-11 PRG90-03 Display

Figure 3-12 PRG90-04 Display

CPU card
CF slot (CN2)
PZ-VM21 PCB
Installing the PZ-VM21 PCB on page
SL1000
2-63.
3-5