SL1000
4. Lead the Line cord through the applicable grooves. (Refer to
previous
page)
5.2.2 Wall-Mounting the DSS Console
1. Replace the leg and the cable must be follow as below.
2. Install 2 screws into a wall. The screw heads must be remained about 3 mm.
83.5
2-74
Leg
Figure 2-117 Cabling for Wall-Mount
7 - 9.5
Figure 2-118 Screw Position for Wall-Mount
Figure 2-114 Cabling of DSS on the
< Bottom view>
3 - 4
1 - 3
Min 10
Unit : mm
ISSUE 1.0
Installation