Figure 2-64 Removing The Main-Cover; Figure 2-65 Mounting Of The 1St Expansion Interface Card - NEC SL1000 Hardware Manual

ISSUE 1.0
3. Loosen two screws and remove the Main-cover.
Two screws
4. Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 408E/008E/000E/1PRIU)
If no more Expansion Interface card is mounted on the 1st PCB, fasten two screws to fix the 1st
PCB at the top of 408E/008E/000E/1PRIU.
Expansion Interface Card
(1st PCB)
J1
Nylon-Spacers
J2

Figure 2-65 Mounting of the 1st Expansion Interface Card

5. In case the 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with
408E/008E/000E/1PRIU)
If no more Expansion interface card is mounted on the 2nd PCB, fasten two screws to fix the 2nd
Hardware Manual
Main-Cover
Hooks

Figure 2-64 Removing the Main-cover

SL1000
Screws
Screw position
1st EXP.
PCB
Right side is same
as this.
Metal-Spacers
2-41