Get /Meters/<Serial>/Io/Configuration - ABB G13 User Manual

Description
User can configure maximum of 4 I/O ports in the meter, either input or
output.
}
6.3.64 GET /meters/<serial>/io/configuration
A GET call to /meters/<serial>/io/configuration returns configuration of Input
and Outputs.
Protected Yes (Authentication required)
Request
GET /meters/<serial>/io/configuration HTTP/1.1
Authorization: Basic XXXXXXXXXXXXXXX=
Examples
2CMC489001M0201
Revision: A
• currentstate[Int] - currentstate of input [ON or OFF] - Applicable in case of
Input/Output
storedstate[Int] - storedstate of input [ON or OFF] - Applicable in
•
case of Input only
counter [Int] - counter value of input - Applicable in case of Input
•
only
500 Internal Server Error
•
HTTP/1.1 500 Internal Server Error
Server: embOS/IP
Accept-Ranges: bytes
Content-Length: 64
Content-Type: application/json
{
"status":"error",
"des":"received invalid response from COSEM."
• https://192.168.1.12/meters/ABB_8/io/configuration
182
JSON Communication
User Manual
G13