Scan Meter - ABB G13 User Manual

4.5.1

Scan meter

The menu appears the first time a user logs in. To configure a meter the meter has
to be scanned and connected to the gateway via correct bus.
The menu is found under the Segment menu. Select Device scan.
Scan new meter
with EQ bus
To scan a meter with EQ bus.
2CMC489001M0201
Revision: A
1. Check the EQ bus box.
2. Check radio button Start, end addresses or Specific
addresses
3. Set specific address/addresses.
4. Press Scan.
29
User Interface and Setup
User Manual
G13