Tariff Configuration - ABB G13 User Manual

To configure a value for a channel:
5.1.5

Tariff Configuration

Within Tariff Configuration each tariff can be configured. Tariff Configuration con-
sists of the tabs Day, Week, Season and Special Day. The Save command
saves locally all changes made, while the Send command sends the changes
made to the meter. When the user leaves a tab, all changes that have not been
saved are discarded.
The Day tab
Within the Day tab a list of switch points with Start time and Action can be
set for each day profile. There can be a maximum of 30 switch points per day, and
a maximum of 16 day profiles. Remember to Save and Send.
The Week tab
Within the Week tab each day of a selected week can be set to either a Week
Day or a Week End. Remember to Save and Send.
2CMC489001M0201
Revision: A
1. Click a channel from the Configured Channels list.
2. Select Demand Type between: Min, Max, Min Sliding and Max
Sliding.
3. Select a value from the options list.
4. Click OK.
5. Click Send.
42
Meter Settings
G13
User Manual