Alarm Configuration - ABB G13 User Manual

5.1.8

Alarm Configuration

To configure an alarm for a channel perform the following steps:
2CMC489001M0201
Revision: A
1. Click a channel from the Alarms list.
2. Select a value to configure from the option list below.
3. Set On Threshold value for activation of the alarm.
4. Set On Delay for delay of the alarm.
5. Set Off Threshold value to set when the alarm is turned off.
6. Set Off Delay to set the time for the alarm to turn off.
7. Check the Log box to log the alarms.
8. Select an Output between 1-4.
9. Click OK.
10.Click Send.
47
Meter Settings
G13
User Manual