Get /Meters/<Serial>/Demand/Configuration - ABB G13 User Manual

JSON Communication
Following explanation elaborates the status handling:
Time tag provides each interval end time during which the demand values
are captured.
}
6.3.78 GET /meters/<serial>/demand/configuration
A GET call to /meters/<serial>/demand/configuration returns demand configura-
tion.
Yes (Authentication required)
Protected
Request
Examples
G13
User Manual
If bit1 is set it is data error and no need to parse further
1.
Else follow next step
If bit0 is set follow next step
2.
Else conclude as data not available
If bit2 is set it is a power off scenario
3.
Else it is good and OK status
value
•
Values in units as per mapping section
timestamp time stamp when the event is recorded.
•
There could be duplication of entries if meter time is set backwards
level For indicative purposes.
•
But whether it is max/min demand to be derived from demand code
in configuration.
502 Internal Server Error
•
HTTP/1.1 502 Internal Server Error
Server: embOS/IP
Accept-Ranges: bytes
Content-Length: 64
Content-Type: application/json
{
"status":"error",
"des":"received invalid response from COSEM."
GET /meters/<serial>/demand/configuration HTTP/1.1
Authorization: Basic XXXXXXXXXXXXXXX=
• https://192.168.1.12/meters/ABB_8/demand/configuration
213 2CMC489001M0201
Revision: A