Disassembly/Reassembly Procedure; Disassembly Procedure - Keysight Technologies U8480 Series Service Manual

Disassembly/Reassembly Procedure

Disassemble the U8480 Series only in a static-free workstation. Electrostatic
CAUTION
discharge renders the U8480 Series inoperative.

Disassembly procedure

Use the following steps to disassemble the U8480 Series.
1 Remove the top label as shown below.
2 Loosen the three screws by using the M2 Torx screwdriver to remove the
Keysight U8480 Series Service Guide
housing.
Repair Guide 4
41