Keysight Technologies U8480 Series Service Manual page 23

4 After calibration, connect the U8480 Series to the test port of the network
5 Compare the measured results to the specifications in the datasheet. If the
Keysight U8480 Series Service Guide
85058B/E for the U8488A, and 85059B for the U8489A). Perform calibration
for the open, short, and load circuits of the network analyzer.
analyzer. Turn on Correction on the network analyzer to perform the VSWR
measurement.
verification fails, refer to
Performance Verification and Adjustments
"Adjustments" on page 31.
2
23