Tektronix RM2000B Instructions Manual

Tektronix RM2000B Instructions Manual

Rackmount kit for tds1000b, tds1000c-edu, tds2000b, and tds2000c series oscilloscopes

Advertisement

RM2000B
xx
TDS1000B, TDS1000C-EDU, TDS2000B, and TDS2000C Series
Rackmount Kit
ZZZ
Instructions
Warning
The servicing instructions are for use by qualified personnel
only. To avoid personal injury, do not perform any servicing
unless you are qualified to do so. Refer to all safety summaries
prior to performing service.
www.tektronix.com
*P071198401*
071-1984-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM2000B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tektronix RM2000B

  • Page 1 RM2000B TDS1000B, TDS1000C-EDU, TDS2000B, and TDS2000C Series Rackmount Kit Instructions Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service.
  • Page 2 Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material.
  • Page 3 Use Care When Servicing With Power On. Dangerous voltages or currents may exist in this product. Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective panels, soldering, or replacing components. To avoid electric shock, do not touch exposed connections. RM2000B Rackmount Kit...
  • Page 4 Service Safety Summary RM2000B Rackmount Kit...
  • Page 5 Kit Description The RM2000B rackmount is designed for use with TDS1000B, TDS1000C-EDU, TDS2000B, and TDS2000C series oscilloscopes. Products TDS1000B and TDS1000C-EDU Series All serial numbers TDS2000B and TDS2000C Series All serial numbers Kit Parts List NOTE. This kit is suitable only for TDS1000B, TDS1000C-EDU, TDS2000B, and TDS2000C oscilloscopes.
  • Page 6 flat washer (M6 and #12 screws) – 4 each #10 finish washer To install a TDS1000B, TDS1000C-EDU, TDS2000B or TDS2000C series instrument, refer to the following illustration. Figure 1: RM2000B Rackmount assembly Figure 2: Dimensions of the RM2000B Rackmount RM2000B Rackmount Kit...

Table of Contents