Otto Bock Kenevo 4X840 Instructions For Use Manual page 7

Umgebungsbedingungen
Betrieb
Allgemein
Kennzeichen
Lebensdauer des Produkts
Gewicht Protector (mit Verschlüssen)
Gewicht elastische Abschlusskappe
1 Foreword
INFORMATION
Last update: 2015-07-08
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
► Receive instruction in the correct and safe use of the product by qualified personnel.
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances).
Contact information can be found on the back page.
► Please keep this document in a safe place.
The "Kenevo Protective Cover" is referred to simply as the protective cover / product below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Have the qualified personnel instruct you in the use of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
2 Product Description
2.1 Design
The product consists of the following components:
-10 °C/+14 °F bis +40 °C/+104 °F
max. 93 % relative Luftfeuchtigkeit, nicht kon­
densierend
4X840
Verschleißteil, das einer üblichen Abnutzung
unterliegt
380 g
11 g
1. Protective cover main unit
2. Upper closure (one side always stays on
the main unit)
3. Lengthwise closure
4. Flexible cover cap
English
Ottobock | 7