USING THE CFV
67
Cameras with Any (Flash Sync) setting
A
When using the Any (Flash Sync) setting, e.g. with a technical
camera, you need to connect the Flash Sync input cable from
the sync socket of the lens to the Flash In input on the CFV (1).
The connect the Flash sync output cable from the Flash Out
socket (2) to the flash as shown in (A).
Cameras with Any (Electronic Shutter) setting
When this setting is used, the CFV will use the electronic
shutter function which is not compatible with flash.
1
2
CFV II 50C USER GUIDE
CONTENTS
www.hasselblad.com