The Cfv On A 200 Camera - Hasselblad CFV II 50C User Manual

5.8 THE CFV ON A 200 CA MERA
The 200 setting in the camera body menu (see page 69)
includes the following camera models:
202FA
●
203FE
●
205TCC
●
205FCC
●
Note!
Function with 200-cameras requires a modification to the
camera that is performed at an authorized Hasselblad Service
centre. A camera that has been modified is identified by a
label on the left side as shown in (A).
Note!
The camera cannot read the ISO value set on the CFV. If using
any automatic mode on the camera, please set corresponding
ISO value also on the camera.
Note!
You can release the camera even if the CFV is not ready for a
capture. Please make sure the status LED on the CFV is green
before releasing the camera.
The basic operation is described in the quick start chapter on
page 16.
Set camera body type to 200 as described on page
●
69.
START LIVE VI E W
1 Set B mode on the lens. If using an F type lens, no special
setting is required.
2 Use a lockable cable release (B).
3 Release the camera.
4 Activate live view
5 Press the Menu Button or Play/On-Off button to end Live
View.
6 Free the cable release lock.
CFV II 50C USER GUIDE CONTENTS
USING THE CFV
52
A
B
www.hasselblad.com