Basic Settings; Set Iso By Touch - Hasselblad CFV II 50C User Manual

5.1 INTRODUCTION
This section will cover the basic operation with all compatible
camera models. For detailed information of each camera
model, you can find user manuals for most older V System
cameras in the downloads section of the Hasselblad website
www.hasselblad.com.

5.2 BASIC SETTINGS

ISO
The ISO value (sensitivity) can be set from the control screen.
If the screen is not active press any of the rear buttons to
activate.
If the control screen is not already visible you can slide the
finger from the top to the bottom to reveal it. This can be
done from any screen. See also page 19.
Alternatively press the menu button (B) until you see the
control screen (A).
You can set ISO either by using touch or by using the buttons.

Set ISO by touch:

Tap the ISO value to bring out the setting list (C). Select the
new ISO value from the list. Slide up/down if the new value is
not visible. Tap the new value and the list will disappear and
the new value will be selected (D).
CFV II 50C USER GUIDE
B
CONTENTS
USING THE CFV
40
A
C
D
www.hasselblad.com