Control Screen; Change Settings Using Touch; Change Settings Using Buttons - Hasselblad CFV II 50C User Manual

CONTROL SCRE E N
This is a status screen showing the actual settings of the CFV.
From this screen, you can change settings directly or activate
Live View.
The control screen can be activated in two ways:
Form any screen, you can slide in the control screen by
●
swiping the display from the top.
Press the Menu button until the control screen is shown
●
(requires 1 or 2 clicks).
From the control screen you can change the following
settings:
White balance (A)
●
ISO (B)
●
Start Live View:
Tap the LV icon (F) . Note that the camera must be
●
prepared for live view. See details starting on page
50.

Change settings using touch

Tap the value to bring up a setting dialogue (K) ISO and (L)
White Balance.

Change settings using buttons

Press the Rectangle Button (H) or the Cross button (G) to
highlight the setting. Press the Star button to bring up the
setting dialogue. If LV (F) is highlighted, live view will start.
The control screen also contain the following status indica-
tions:
Battery status with option percent value (C) .
●
Exposure mode (Manual) (E)
●
Camera body type (D)
●
Remaining images on card (free space) (G)
●
Card status (J)
●
When the camera body is set to Any (Electronic Shutter), there
are additional options on the control screen. See more on
page 58.
CFV II 50C USER GUIDE
A
D
E
F
CONTENTS
PARTS & CONTROLS
C
B
G H I
www.hasselblad.com
34
J
K
L