Connectivity Chart – Mechanical Shutters - Hasselblad CFV II 50C User Manual

1.10 CONN ECTIVITY CHART – MECHANICAL SHUTTERS
CFV II 50C
907X
For full access to XCD Lenses.
H, V, XPan and most other lenses
via optional adapters.
Described in detail in a separate
user guide.
CFV II 50C USER GUIDE
PHOCUS
REMOTE CONTROL
CABLE FREE
OPERATION
FLASH SYNC
INPUT CABLE
ALWAYS
REQUIRED
CONTENTS
INTRODUCTION
503 CW / 503CWD
503 CXi
+ Winder CW
500 EL, 500 EL/M
500 ELX, 553 ELX
555 ELD
500 C, 500 C/M
501 C, 501 CM
503 CX, 503 CXi, 503 CW, 503CWD
SWC/M
903 SWC
905 SWC
Modified 202FA, 203 FE, 205 TCC, 205 FCC
With F type lenses and CF/CFi/CFE lenses at
F-mode setting
555 ELD
500 EL / EL/M
500 ELX/ 553 ELX, 555 ELD
2000 FC, 2000 FC/M
2000 FCW, 2003 FCW
201 F,
Unmodified 203 FE, 205 TCC, 205 FCC
ArcBody
1)
FlexBody
Any view camera
with Hasselblad V
System adapter
1)
Shift settings are not recommended on cameras
1)
with wide angle lenses and a short lens to image
plane distance. E.g. the ArcBody.
13
Exposure cable 503 CW
is required for Phocus
remote control of 503CW
+ Winder CW.
Exposure Cable EL is
required for Phocus
remote control of EL/ELM
and ELX use.
With C type lenses only
(C-mode setting)
www.hasselblad.com