Remote Control Of A 503Cw With Winder Cw - Hasselblad CFV II 50C User Manual

RE MOTE CONTROL OF A 503CW WITH WI N D E R CW
When the 503CXi or 503CW camera is equipped with the
Winder CW, it can be remotely released when tethered to a
Mac or PC running Phocus. More information on how tether-
ing works can be found on page 103.
Connect the exposure cable 503 (A) between the CFV and
the socket at the bottom of the Winder CW (C). The 2.5mm
connector shall be connected from the ELX socket on the CFV
(B).
Set camera body type to 503 + Winder CW as
●
described on page 69.
When the camera is connected via USB to a computer running
Phocus, you can release the camera from the computer. See
separate phocus user guide for more details.
CFV II 50C USER GUIDE CONTENTS
USING THE CFV
51
A
B
C
www.hasselblad.com