The Cfv On An Swc Camera; Start Live View With A Swc Camera - Hasselblad CFV II 50C User Manual

5.9 THE CFV ON AN SWC CA MERA
The SWC setting in the camera body menu (see page 69)
includes the following camera models:
SWC/M
●
903 SWC
●
905 SWC
●
Older versions of the SWC cameras cannot be used.
The basic operation is described in the quick start chapter on
page 16.
Note!
You can release the camera even if the CFV is not ready for a
capture. Please make sure the status LED on the CFV is green
before releasing the camera.
Set camera body type to SWC as described on page
●
69.
START LIVE VI E W WITH A SWC C A ME R A
1 Set B mode on the lens.
2 On the SWC cameras, there is a small lever (time catch) (A)
that you can switch from 0 to T position (B). This will lock
the release button in the in position.
3 Press the shutter release.
4 Activate live view.
5 Press the Menu button or Play/On-Off button to end Live
View.
6 Move the time catch back to the 0 position.
CFV II 50C USER GUIDE
Normal mode
Time mode. Release button will be
locked in the in-position.
CONTENTS
USING THE CFV
53
A
B
www.hasselblad.com