Quick Start; Firmware; Battery; Mounting The Focusing Screen Mask - Hasselblad CFV II 50C User Manual

2.1 QUICK START

This chapter explains how to make the first capture using the
CFV on a 500-series camera and the default settings.
A more detailed description for all compatible camera models
can be found starting on page 50.

FIRMWARE

Make sure the CFV has the latest firmware by checking www.
hasselblad.com. You can see which firmware that is currently
installed in the CFV by following the procedure on page
97. You can find instructions on how to update to the latest
version on page 93.
BAT TE RY
Make sure the battery is fully charged. Open the right side
lid by sliding it backwards and insert the battery with the text
facing backwards into the CFV. Push until the battery release
catch clicks in place. (A). See charging instructions on the
next page.
Note!
When the battery is inserted, the rear status LED will show a
blink sequence once to indicate the current battery charge
level. See next page for details.
SD C ARD
Insert the SD card into slot 1 or 2. The contact side of the
1
card shall be facing towards the rear display. Close the lid by
swinging it back and sliding it forward. (B)
For best results, the card should be formatted in the camera
by using the procedure on page 83.
MOU NTI N G TH E FOCUSI N G SCRE E N M ASK
The supplied focusing screen mask allows you to mask areas
outside of what the sensor can capture. Place it on top of the
Focusing Screen (C) . For a more fixed attachment, remove the
backing paper and attach it using the adhesive backing. This
will however, make it less flexible if the camera is also used
with a regular film magazine.
For a list of compatible SD cards, see page 82.
1
CFV II 50C USER GUIDE CONTENTS
QUICK START
16
A
B
C
www.hasselblad.com