Self Timer; Interval; Exposure Bracketing - Hasselblad CFV II 50C User Manual

Self Timer (A)
●
The camera will wait a pre-set time to make the
exposure after the Shutter release button is pressed.
Time: Delay between shutter release and exposure.
When Finished: Determines if the function shall be
active after a completed cycle or not. If set to Exit, the
Self Timer is disabled after the exposure.
Interval (B)
●
The camera will make a pre-determined number of
exposures with a pre-set interval time.
Time: The time between exposures.
Frames: How many exposures will be made.
Initial Delay: Delay between shutter release and first
exposure.
Exposure bracketing (C)
●
The camera will automatically make a pre-determined
number of exposures with a pre-set adjustment to the
shutter speed between each frame.
Amount: How much exposure difference between
each exposure.
Frames: The number of exposures in the sequence.
Initial Delay: A delay between shutter release and the
first exposure.
Initial Delay: Delay between shutter release and first
exposure.
Param in M: This function is only available when using
the 907X camera body.
Sequence: Determines which order exposure adjust-
ment is added.
When Finished: Determines if the function shall be
active after a completed cycle or not.
For Self Timer, Interval and Exposure bracketing the left
part of the panel displays the current setting. If no changes
are required, tap the function icon again to make it active.
To change any of the parameters, tap the right part of the
screen (D). This will bring up the dedicated settings for the
function. See details on the following pages.
CFV II 50C USER GUIDE
Self Timer

Interval

Exposure Bracketing
CONTENTS
USING THE CFV
61
A
D
B
C
www.hasselblad.com