Attach The Cfv To The Camera - Hasselblad CFV II 50C User Manual

AT TAC H TH E C F V TO TH E C A ME R A
Prepare the camera by first removing the film magazine. (A)
This is to shorten the time needed to attach the CFV in order
to collect as little dust as possible on the sensor.
Note!
If this is the first time the CFV is used, please remove the
protective film from the sensor before attaching to the
camera.
Remove the protective cover from the CFV by sliding the Lock
Button to the left (the protective cover is facing you). Swing
the cover free from the CFV and put it aside. (B) To minimize
dust on the sensor, try to keep the time until you have
attached the CFV to the camera, as short as possible. Also
perform this procedure in a dust free environment.
Attach the CFV to the camera in the same way as a normal film
magazine. Hold the lock button in the open position (C) until
the CFV is fully mounted on the camera, then release the lock
button (D). Make sure the CFV is securely fixed to the camera.
CFV II 50C USER GUIDE
A
CONTENTS
QUICK START
18
B
C
D
www.hasselblad.com