Camera - Hasselblad CF22 CF39 User Manual

Exposure Cable 503
Hasselblad 503CW plus Winder CW with
Exposure cable 503 in place showing
connection from Winder to adapter.
MAIN MENU > SETTINGS > Camera
The camera choices that appear on the menu are automatically restricted to the adapter you have
fitted. So, if you have have fitted an adapter specifically intended for Hasselblad models, then only
Hasselblad models will appear. The following is a description of settings and action needed when
working with the various Hasselblad models.
The exposure time set on a CF digital back sets the maximum length of exposure. The
default setting is 1/8 sec and this is the setting that can be kept for all exposures from 1/8
sec. However, this setting should be changed in accordance with the time required if it
exceeds 1/8 sec. Times of up to 32 seconds can be set.
If you prefer, you can connect the 'Flash sync input cable' between the lens PC socket
and a CF digital back which allows you to retain the default setting of 1/8 second while
still being able to use exposure times longer than 1/8 second. This method also allows
the use of the B setting.
Model setting variations
Look in the list below for the camera model you are using and make the appropriate set-
tings change. Don't forget to change the setting if you change camera model!
Please note that certain connection cables /cords are only included as accessories to
certain adapters. Please see adapter manuals for further information.
Winder CW
For use with 503 CW models:
• Make a Winder CW setting.
• If you want to control the camera from FlexColor, connect the Exposure cable 503
between a CF digital back and the Winder CW.
• Do not use the winder at rapid sequence setting.
ELD
For use with ELD models:
• Make an ELD setting.
• A B setting exposure can be made by choosing the "Bulb" in the "Exposure Time" setting.
The maximum exposure time remains at 32 seconds however.

Navigating the
CAMERA settings
Please note that this
particular list is only
an illustration.
Camera choice
displayed will vary
according to adapter
fitted.