Avaya Definity G3 / ProLogix Configuration Note page 7

AVAYA DEFINITY G3 / ProLogicx
•
Message Waiting MWI Device Assignment
Select "Switch Interface Administration" menu
Select "Call Data Interface Administration" menu
Select "MWI Administration" menu
Select "Device Assignment" option
Administer parameters as follows:
If the group of channels for MWI updates is 3, the screen will
look like figure 1.
Link Test [Y/N]:
Switch Number
1
•
System Translation Administration
Select "Switch Interface Administration" menu
Select "Call Data Interface Administration" menu
Select "System Translation Administration" menu
Select "Dial Plan Translation" option
Administer the following:
INTUITY Extension Length: <Switch Subscriber extension
length>
Administer extension ranges in the table as follows:
•
1) Leave "Switch Prefix" field blank
2) Enter the valid extension ranges in "Switch Start Ext." and
"Switch End Ext." fields
3) Leave "INTUITY Prefix" field blank
4) Enter the Switch number in the entry. This is the same
number used in the AUDIX subscriber database
5) Enter"N" in the remote [Y/N] field
The following example shows how this form should be filled, if
the extension length is 3 digits on the INTUITY and the valid
extension
2555 through 2999, while INTUITY subscribers ranges are 111
through 222, 555 to 999.
INTUITY Extension Length: 3
Switch Switch Switch
Prefix Start Ext. End Ext.
1 111 222
2 555 999
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
Link Test Interval:
Device ID
3
Figure 1
ranges on the switch begin 1111 through 1222 and
Switch Network Access Code:
INTUITY Switch
Prefix Number[Y/N]
1
1
7
Confidential
Link Test Number
Remote
N
N