Supported Features - Avaya Definity G3 / ProLogix Configuration Note

Supported integration features
Configuring the PBX to
integrate
AVAYA DEFINITY G3 / ProLogicx

4.0 SUPPORTED FEATURES

•
Call coverage to personal greeting
- busy
- ring-no-answer
- all calls
•
Message-Waiting Indicator
- lights
- audible message waiting (optional PBX feature)
•
Automated Attendant
•
Outcalling, Paging
•
Multiple return-to-operator
•
Direct Call
•
Personal greeting of original-called party on a double-call forward
using call coverage
•
Reply to message left by subscriber in internal telephone-answering
mode
•
Call Sender
5.0 CONFIGURING THE PBX TO INTEGRATE
Five tasks must be completed when programming the PBX to integrate.
They are as follows:
•
Enable Mode Code Integration.
•
Configure each analog voice port.
•
Configure the analog voice ports into a UCD group.
•
Create call coverage path(s) that include the Intuity system access
number.
•
Change subscriber's station programming to include the call
coverage path.
5.1 MODE CODE SWITCH ADMINISTRATION
Feature Administration to Enable Mode-Code Integration.
•
Use the switch's Customer Options form to enable mode code
integration.
Proceed as follows:
1. Enter the command: change system-parameters customer-
options and make sure the G3 Version (on the first line) is set to V6.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
2
Confidential