Installation
3.2.3
Prepare the ceiling lift hood
D WARNING!
Risk of death due to electric shock!
Touching live parts can cause an electric shock, burns or
death.
☞ Ensure that the power supply is switched off and
remains so.
☞ Use an SW 2.5 (Inbus) Allen key to unscrew the screws on
the cover.
☞ Remove the cover upwards. Pay attention to the support
cable and the mains cable.
6003594_0 – 29.06.2017
3.2.4
Fit front panels
D ATTENTION!
Danger of damage due to improper handling!
The assembly profiles, ceiling lift hood or front panels could
be damaged during assembly.
☞ Move the components slowly and carefully.
☞ Keep objects that could scratch the components far away
from it (e.g. tools, belt buckles).
☞ Do not place any objects on the ceiling lift hood.
☞ During all assembly steps ensure the correct arrangement
of the assembly profiles. The position is shown on the
assembly profile:
y "top" for the top front panels (the bracket points
upwards).
y "bottom" for the bottom front panels (the bracket
points downwards).
=
1.
☞ Mark the centre of the front panels.
☞ Position the assembly profile centrally on the front panel.
The punch-out (diamond) and the bracket aid correct
positioning.
Once the correct position has been determined:
☞ Glue or screw the assembly profiles to the front panels to
attach them.
Observe the instructions of the glue manufacturer.
=
3.
2.
47