Table of Contents
Advertisement
User's Guide
Left Offset in Back:
Adjust the left margin for the back of the page when performing 2-sided printing.
Check Paper Width:
Select On to check the paper width before printing. This prevents printing beyond the edges of
the paper when the paper size setting is incorrect, but this may lower the print speed.
Skip Blank Page:
Skips blank pages in the print data automatically.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏ On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏ Off
Displays an error message and cancels printing.
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no difference in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. The printer prints the
other side after printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB.
Fax Settings
Select the menu on the control panel as described below.
Settings > General Settings > Fax Settings
See Related Information below.
Related Information
"Menu Options for Fax Settings" on page 51
&
Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Preparing the Printer
37
Advertisement
Table of Contents
