Epson ET-M3140 Series User Manual page 95

User's Guide
4. Select the Fax Settings tab, and then tap Direct Send to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Related Information
"Placing Originals" on page 29
&
"Sending Faxes Automatically Using the Control Panel" on page 92
&
"Fax Settings" on page 101
&
Sending Faxes at a Specified Time (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1. Select Fax on the home screen.
2. Specify the recipient.
3. Select the Fax Settings tab, and then select Send Fax Later.
4. Tap the Send Fax Later field to set this to On.
5. Select the Time field, enter the time you want to send the fax, and then select OK.
6. Select OK to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
7. Send the fax.
Note:
You cannot send another fax until the fax has been sent at the specified time. If you want to send another one, you need
to cancel the scheduled fax by selecting Fax on the home screen, and then deleting it.
Related Information
"Placing Originals" on page 29
&
"Sending Faxes Automatically Using the Control Panel" on page 92
&
"Fax Settings" on page 101
&
Sending Different Size Documents Using ADF (ADF Continuous Scan)
Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document
at their original sizes.
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1. Place the first batch of originals at the same size.
2. Select Fax on the home screen.
Faxing
95