Table of Contents
Advertisement
ATTACHING THE TABLE
1.
Push in the table (1) till it hits the bottom with care to maintain equally at both right and left of top of the base cover
(2) on the embroidery machine.
2.
Tighten the right and left fixing screws (3). This completes the attaching of the table.
Table (1)
DIP SWITCH SETTING
Set DSW1-2 at ON to change the LCD indicator on the operation panel box to the display in Japanese.
Fixing screw (3)
23
Base cover (2)
Base
Fixing screw (3)
- Quick Links:
- Checking the Parts
Hide quick links:
Advertisement
Table of Contents
