Setting The Hoop To The Embroidery Machine - Toyota Expert EPS9000 Instruction Manual

SETTING THE HOOP TO THE EMBROIDERY MACHINE

1. Attach two holder bases (1) to the joint plate (2) in the direction indicated by
with screws (3).
Determine the holder base (1) attaching position meeting the size of the hoop.
2. Insert the right and left metallic tabs of the embroidery hoop set in the sections A and B in the direction of dashed
line arrows and fix the tabs by engaging the hoop presser springs (4) of the holder bases (1) in the tabs.
Hoop presser spring (4)
A
Right hoop metallic tab
Screw (3)
Joint plate (2)
Holder base (1)
Hoop presser spring (4)
Left hoop metallic tab
Embroidery hoop set
22
symbol and secure them in place
Screw (3)
Holder base (1)
B