OFFSET
This function moves the hoop to the position set as the offset position and
returns the hoop to the originally located position after finishing the work.
For offset, automatic/manual setting is possible (hoop setting).
1. Manual Offset
Pressing the MOVE HOOP key (offset key) while the machine is at a still
causes the hoop to travel to the offset position. Pressing the offset key again
returns the hoop to the previously located position.
<Example: Arranging applique>
(1) Stop the machine.
(2) Move the hoop to the offset
position.
(3) Arrange the applique.
(4) Return the hoop to the previ-
ously located position.
Setting a pause at color
change (Page 61) will facilitate
arranging such as applique.
FD07
82
Offset position
Stop position