Repeat - Toyota Expert EPS9000 Instruction Manual

REPEAT

This function repeatedly embroiders the design data which is set as the
embroidery data.
The function allows the setting of direction of repeat, the number of repetition
times and the spacing between designs.
The design arranged using the repeat function may be rotated and
reversed.
Priority: Repeat
<Example: Direction:
You can check the entire embroidery range by executing trace after setting
the repeat data. Adjust the start point, number of repetition times and
spacing so that the embroidery range will not exceed beyond the hoop.
<Example: Direction:
Rotation:
FD07
Rotation Mirror
Horizontal, Times: 3, Space:
Direction:
55 mm
Horizontal
Horizontal, Times: 3, Space:
90 , Mirror: X>
Direction: Horizontal (Although
"HORIZONTAL" is set for DIR,
design is arranged vertically
since 90 rotation is set.)
60 mm
81
55 mm>
: Design
start point
60 mm,
Rotation
Design start
position