Hoop Forward/Back (N-Stitch Feed) - Toyota Expert EPS9000 Instruction Manual

HOOP FORWARD/BACK (n-STITCH FEED)

This operation moves the hoop forward or backward to the input stitch position.
When performing this operation, do not put your hands or others
under the needle or on the table.
Otherwise, you could get hurt when the needle or hoop has
moved.
1 Select MODE (n ST).
* * * * * E M B P A U S E * * * *
A I S I N 1 2 3 . 1 0 O
7 5 /
0 2 / 1 5 : 1 2 3 4 5 6 7 8 9 A B < D >
2 Input the number of stitches (Example: 356).
* * * * * E M B P A U S E * * * *
A I S I N 1 2 3 . 1 0 O
7 5 /
0 2 / 1 5 : 1 2 3 4 5 6 7 8 9 A B < D >
3 Move the hoop to the input stitch position.
* * * F O R W A R D / B A C K * * *
A I S I N 1 2 3 . 1 0 O
* 3 5 6 /
0 2 / 1 5 : 1 2 3 4 5 6 7 8 9 A B < D >
4 End of operation
* * * * * E M B P A U S E * * * *
A I S I N 1 2 3 . 1 0 O
3 5 6 /
0 6 / 1 5 : 1 2 3 4 5 6 7 8 9 A B < D >
FD07
CAUTION
!
Press
C
1 0 2 7
select "n", representing the
numeric-key input stitch position.
7 8 9 0
n S T
4 5 6
1 0 2 7
1 2 3
Input the number of stitches using
the numeric keys.
n S T
Press
1 0 2 7
n S T
1 0 2 7
77
Setting:
- 1 :
repeatedly to
- 10 :
- 100 :
- C :
- n-ST :
If the input number of stitches is
larger than the present number of
stitches, the hoop travels forward
and if it is smaller than the present
number of stitches, the hoop trav-
els back.
Pressing the SET key makes it
traveling forward or backward
(hoop travel) to the input stitch
.
position.
1 / 10 / 100 / C / n-ST
1-stitch unit
10-stitch unit
100-stitch unit
Color-change unit
Numeric-key input stitch
position