Cleaning
1 Thread trimming section
2 Take-up lever guide, 3 Needle case guide
4 X-/Y-axis drive system (2 places)
1
<Thread trimming section cleaning procedure>
1. Remove two needle plate clamp screws.
2. Detach the needle plate.
3. Remove waste thread.
4. Fit the needle plate.
5. Fix the needle plate with two needle plate
clamp screws.
FD07
Cleaning Area
2
3
Needle plate clamp screw
Needle plate
Needle plate clamp screw
Interval
Every day
Once/week
Once/2 weeks
87
4
4