How To View The Historic Events; Cards Inside The Control Panel - Honeywell Gent Vigilon Compact Operating Instructions Manual

Operating instructions

How to view the historic events

There can be up to 255 events stored in the Historic
log of the panel. To view the Historic events log.
a. Press MENU ON/OFF.
b. Press the F3 button to select [Info].
"
Ignore step c if an external
printer is switched off or is not fitted.
c. To display the event(s): Press the F1 button to
select [Display]. Notice 'Display' appears on
the display.
To print the event(s): Press the F2 button to
select [Print]. Notice 'Print' appears on the
display.
d. Press the F2 button to select [Historic]. Notice
'Historic' followed by a flashing cursor appears
on the display.
e. Use the keypad to input an event number or
range (1-255).
"
Event '1' is always the most recent event.
f. Press the F2 button to select [Enter]. Notice all
the active Fire, Fault and Disablement events
will be displayed or printed depending on your
selection.
28

Cards inside the control panel

In the following text CARD n notation is a physical slot
on the PCB inside the panel, while 'Card n' notation is
a menu reference used to describe a function.
¨
'Card 0' is always the Master control board
(MCB), which is the central controller of the fire
alarm system.
¨
'Card 1' is always the 1st loop circuit or loop
card 1, that is fitted in CARD 1 slot on the master
control card. A loop card monitors and controls
the devices on a loop circuit
¨
'Card 2' slot can accept either or both of the
following:
•
A 2nd loop card that monitors and controls
the devices connected to loop circuit 2. The
menus refer to this card as 'Card 2'.
•
Network card that connects to the other fire
control panels in a network system. The
menu refers to this card as 'Card 10'.
¨
'Card 14' is always the memory which resides on
the Master controller board.