How To Save Changes To Memory; How To View Active Events - Honeywell Gent Vigilon Compact Operating Instructions Manual

How to save changes to memory

If you make any changes to Labels or Password then
you must save these to the NVM (Non Volatile
Memory) or Memory of the panel. The 'save' option is
only available when the controls are at Access level 2.
"
Any changes made to labels
and password can only be saved to the
NVM (Memory). It is only possible to save
changes when there are no active
disablements present in the system.
The following procedures assume a customer
password (PIN) is setup by the servicing organisation.
a. Press the MENU ON/OFF button.
b. Press the F2 button to select [Set Up].
c. Press the F4 button to select [UserCode].
Notice a message on the display 'Enter access
code' followed by a flashing cursor. Use the
keypad to input your PIN code and then press
the Enter button.
d. Press the F3 button to select [Save].
e. Press the F2 button to select [Enter]. Observe
confirmation message: 'data is backed up'.
Vigilon

How to view active events

An active event is an event that is still present and has
not cleared. You can view all active Fire, Fault or
Disablement events.
a. Press MENU ON/OFF.
b. Press the F3 button to select [Info].
"
Ignore step c if an external
printer is switched off or not fitted.
c. To display the event(s): Press the F1 button to
select [Display]. Notice 'Display' appears on
the display.
To print the event(s): Press the F2 button to
select [Print]. Notice 'Print' appears on the
display.
d. Press the F1 button to select [Active]. Notice
'Active' appears on the display.
e. Press the F2 button to select [Enter]. Notice all
of the active Fire, Fault and Disablement events
will be displayed in turn. Use F2 [Previous] and
F3 [Next] to scroll through the displayed events.
You can view events on a card by card basis by
following steps a. to d, and then press the F3
button to select [Card] and notice 'on card'
appears on the display. Enter the card number
and press F2 [Enter].
f. Press the F4 button to select [Quit] when
viewing of events is complete.
COMPACT VOICE ALARM
29