View System Events - Honeywell INTELLIGUARD 9000 User Manual

5. View System Events

ACTION
Press
MODE
Enter your ID #.
Enter your CODE #.
Press until you reach:
EVENT LOG
To accept
EVENT LOG
press
If three dots follow the description of the event log, you may
view additional information on the event log by pressing
?
NOTE 1: EXAMPLE ONLY
"A1 DISARM ID02..."indicates that AREA # 1 has been disarmed by user # 2, more
information is included. Consult the "REFERENCE GUIDE" section for a description
of the message.
— The detectors activation date and time are in UPPER CASE characters.
— The detectors reset date and time are in LOWER CASE characters.
"yy/mm/dd hh:mm " indicates the date and time of the event.
To view previous
events, press
NOTE 2: A new event is displayed every time the DOWN ARROW key is pressed. "END OF
LIST!" indicates the last event.
To exit , press
To exit, press
MESSAGE
ID ? – –
ID ? # #
CODE ? – – – –
MODE MENU
1—SYSTEM STATUS
MENU MODE
3—EVENT LOG
A1 DISARM ID02 ...
yy/mm/dd hh:mm
END OF LIST!
(2 sec)
MODE MENU
3—EVENT LOG
** INTELLIGUARD 9000 **
yy/mm/dd hh:mm
SIGNAL
2 BEEPS
2 BEEPS
25