How To View Zone Labels; How To View The Local Panel Label - Honeywell Gent Vigilon Compact Operating Instructions Manual

How to view zone labels

A zone is a subdivision of a building used for fire
detection. To view a zone label you will need to know
the zone number and the loop on which it resides. You
can find this information in the site specific
documentation, held by the person responsible for the
fire alarm system.
a. Press the MENU ON/OFF button.
b. Press the F3 button to select [Info].
"
Ignore step c. if the external
printer switched off or is not fitted.
c. To display a Zone label: Press the F1 button to
select [Display]. Notice 'Display' appears on
the display.
To print a Zone label: Press the F2 button to
select [Print]. Notice 'Print' on the display.
d. Press the F4 button to select <etc>.
e. Press the F2 button to select [Label]. Notice
'Label' appears on the display.
f. Press the F4 button once to select <etc>.
g. Press the F1 key to select [Zone]. Notice 'Zone'
followed by a flashing cursor appears on the
display. Use the keypad to input a Zone number
or range (1-128).
h. Press the F2 key to select [Enter]. Notice the
selected label information is either displayed or
printed.
Vigilon

How to view the local panel label

When there is a network of control panels connected
together in a system then each panel is usually given
an identification label, also referred to as the Local
panel label.
a. Press the MENU ON/OFF button.
b. Press the F3 button to select [Info].
"
Ignore step c. if the external
printer switched off or is not fitted.
c. To display the local panel label: Press the F1
button to select [Display]. Notice 'Display'
appears on the display.
To print the local panel label: Press the F2
button to select [Print]. Notice 'Print' appears
on the display.
d. Press the F4 button to select <etc>
e. Press the F2 button to select [Label]. Notice
'Label' appears on the display.
f. Press the F4 button once to select <etc>.
g. Press the F2 key to select [Local]. Notice
'Local' appears on the display.
h. Press the F2 key to select [Enter]. Notice the
selected label information is either displayed or
printed.
COMPACT VOICE ALARM
35