Huawei SUN2000L Series User Manual page 98

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
Table 7-3 Description of feature parameters
Parameter
MPPT multi-peak scanning
MPPT multi-peak scan
interval (min)
Auto OFF due to comm
interrupted
Auto ON due to comm
resumed
Issue 03 (2018-04-11)
Description
When the SUN2000L is
used in scenarios where PV
strings are obviously
shaded, enable this function.
Then the SUN2000L will
perform MPPT scanning for
all PV strings at regular
intervals to locate the
maximum power.
The scan interval is
specified by MPPT
multi-peak scan interval.
Specifies the MPPT
multi-peak scanning
interval.
This parameter is displayed
only when MPPT
multi-peak scanning is set
to Enable.
Certain power grids require
that the SUN2000L must
shut down after the
communication is
interrupted for a certain
time.
If Auto OFF due to comm
interrupted is set to Enable
and the SUN2000L
communication is
interrupted for a period of
time specified by Comm
interruption duration), the
SUN2000L will
automatically shut down.
If this parameter is enabled,
the SUN2000L
automatically starts after
communication recovers. If
this parameter is disabled,
the SUN2000L needs to be
started manually after
communication recovers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range

Disable

Enable
[5, 30]
 Disable
 Enable

Disable
 Enable
91