Huawei SUN2000L Series User Manual page 50

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual

Cables with high rigidity, such as armored cables, are not recommended as DC input
power cables, because poor contact may be caused by the bending of the cables.

Before assembling DC input connectors, label the cable polarities correctly to ensure
correct cable connections.

The metal contacts supplied with the DC connectors are either cold forming contacts or
stamping forming contacts. Crimp the metal cold forming contacts using crimping tool
UTXTC0005 (Amphenol, recommended) or H4TC0001 (Amphenol). Crimp the metal
stamping forming contacts using crimping tool H4TC0003 (Amphenol, recommended) or
H4TC0002 (Amphenol). Choose the crimping tools that fit the metal contacts.

After crimping the positive and negative metal terminals, pull the DC input power cables
back to ensure that they are connected securely.

Insert the crimped metal terminals of the positive and negative power cables into the
appropriate positive and negative connectors. Then pull back the DC input power cables to
ensure that they are connected securely.
Figure 5-11 Assembling a DC connector (using metal cold forming contacts)
(A) Positive metal terminal
(D) Positive connector
Issue 03 (2018-04-11)
(B) Negative metal terminal
(E) Negative connector
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(C) UTXTC0005 crimping
tool
(F) H4TW0001 removal
wrench
43