Huawei SUN2000L Series User Manual page 70

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
LCD
Issue 03 (2018-04-11) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
Operation Procedure
3. Enter the User name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User name as Advanced User or Special
User. The initial password for Advanced User
and Special User is 000001.

Use the initial password upon first power-on
and change it immediately after login. To
ensure account security, change the password
periodically and keep the new password in
mind. Not changing the initial password may
cause password disclosure. A password left
unchanged for a long period of time may be
stolen or cracked. If a password is lost, devices
cannot be accessed. In these cases, the user is
liable for any loss caused to the PV plant.

After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit the screen and log in
again within 30 seconds, no authentication is
required.
4. Choose Device Mgmt. and press
 Perform step 5 to enable the
SmartLogger1000 to automatically search
for devices.
 Perform step 6 to add devices to the
SmartLogger1000.
.
.
63