Handling The Sun2000L; Removing The Sun2000L; Packing The Sun2000L; Disposing Of The Sun2000L - Huawei SUN2000L Series User Manual

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual

9.1 Removing the SUN2000L

Procedure
Step 1 Power off the system by following the instructions in
Step 2 Disconnect all cables from the SUN2000L, including signal cables, DC input power cables,
AC output power cables, and PE cables.
Step 3 Remove the WiFi antenna from the SUN2000L.
Step 4 Remove the SUN2000L from the mounting bracket.
Step 5 Remove the mounting bracket.
----End

9.2 Packing the SUN2000L




9.3 Disposing of the SUN2000L

If the SUN2000L service life expires, dispose of it according to the local disposal rules for
electrical equipment and electronic component waste or return the SUN2000L to Huawei.
Issue 03 (2018-04-11)
9
If the original packaging is available, put the SUN2000L inside it and then seal it using
adhesive tape.
If the original packaging is not available, put the SUN2000L inside a suitable cardboard
box and seal it properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Handling the SUN2000L

6.3 Powering Off the
9 Handling the SUN2000L
System.
123